Skip to main content

Design the Jet Engine of the Future, Win $2 Million

The U.S. Air Force is offering $2 million to whoever can design a new and improved engine to power its airplanes.

The competition, known as the Air Force Prize, is open to American citizens and permanent U.S. residents age 18 and older, as well as corporations and research institutions in the United States. The goal of the contest is to speed up the development of a lightweight, fuel-efficient turbine engine, or jet engine, to power the aircraft of the future.

This is the first time the Air Force, or any other branch of the U.S. military, is offering a prize to stir up technological innovation among the general public, said Lt. Col. Aaron Tucker, deputy chief of the turbine engine division at the Air Force Research Laboratory (AFRL). [Supersonic! The 10 Fastest Military Airplanes]

"The secretary of the Air Force is really looking for innovative ways to acquire systems and technology," Tucker told Live Science.

Even though the AFRL is chock-full of "really smart people," Tucker said Air Force engineers don't own the market on new turbine engine designs. And asking Americans to invent new military technologies in exchange for cash is already a proven way of conducting research and development projects — just look at the Defense Advanced Projects Research Agency (DARPA).






That agency, the research branch of the U.S. Department of Defense, holds "prize challenges" that invite Americans (and members of the international community) to find novel solutions to complex military-related problems, such as how to design two-legged robots that can perform useful tasks without falling over or how to get a bunch of little drones to land inside an airplane.

But the objective of the Air Force Prize is a bit different from that of most DARPA challenges. Contestants aren't actually designing something new; they're redesigning something old so that it can be used for new purposes, Tucker noted.

Turbine engines have been used inside most large Air Force aircraft since around 1948. Before that, the planes that transported troops, carried weapons and conducted surveillance had piston engines (the same kind of engine found in most cars), Tucker said.

A kind of internal combustion engine, piston engines work using a supply of hot air and fuel to build pressure inside the engine to move a piston, or cylinder, which, in turn, moves a handle (called a crankshaft) and generates power.

But turbine engines, also known as gas turbines, work by using a high-speed fan that sucks air into the engine, where it is compressed, mixed with fuel and then ignited. The burning gases expand inside the engine and shoot out the "nozzle" at the back of the engine. As a result, whatever the engine is attached to is propelled forward, according to NASA.

Both piston and turbine engines have advantages and disadvantages, Tucker said. The main advantage of gas turbines is that they're much lighter than piston engines, but the smaller a gas turbine is, the less fuel-efficient it is, he added.

This is where the Air Force hopes to find innovative new ideas.

"What we're trying to do is align the fuel efficiencies from a piston engine, match that with being lightweight and end up with a lightweight, fuel-efficient turbine engine," Tucker said.




To register for the contest, participants need to submit a design idea to the AFRL, where experts will decide if the design is really that of a turbine engine. But rather than defining exactly what would qualify as a turbine engine in the contest rules, the AFRL decided to leave the definition open to interpretation to allow for greater innovation from participants.

To win the $2 million prize, participants must haul their engine prototypes to the AFRL, located at the Wright-Patterson Air Force Base in Ohio. Engines must pass the same 6-hour test two times. If the engine prototype can work more than once, it's likely worth developing further, Tucker said.

The winning engine (or the first to pass the AFRL's round of tests) will not be purchased by the Air Force because $2 million isn't enough money to pay for the intellectual property rights of this kind of technology, Tucker explained. Instead, the Air Force is promoting the contest with its industry partners (companies like Boeing and Raytheon), in the hope that these partners will purchase the new turbine engine design, continue developing it and, eventually, start incorporating it into future models of military aircraft.

Additional details about the Air Force Prize, plus instructions for how to register for the competition, can be found  on the contest website




Source:- Livescience

Comments

Popular posts from this blog

Google and Stanford early adopters of Honda Fit EV

Honda's first all-electric vehicle is hitting the streets a little early. The  Honda Fit EV  debuted at the Los Angeles Auto Show in November 2011, and it's expected to be     available for lease this summer. However,  Honda announced  that Google and Stanford University got a special early delivery of the tiny EV this week.The Honda Fit EV is equipped with a 20kWh lithium ion battery, and has an EPA estimated driving range of 76 miles. Google added the EV to its  car -sharing service for employees, dubbed the G-Fleet, in    Mountain View, Calif. The search giant maintains several electric and plug-in vehicles that it uses for research and to cart Googlers around town and between buildings on campus. Stanford University also is an early adopter of the Fit EV, but will be using it primarily for research. The university's automotive research department will study the difference in psychological and physical reactions of using battery...

Hand-manipulated objects and transparent displays - the computer desktop of tomorrow

A see-through screen, digital 3D objects manipulated by hand, perspective adjustments according to the user's viewing angle - these are the core features of a prototype computer desktop user interface created by Microsoft's Applied Sciences Group. The prototype uses a "unique" Samsung transparent OLED display through which the user can see their own hands to manipulate 3D objects which appear to be behind the screen. A demo video appears to show a working prototype of a computer markedly different from those we use today. Yes it includes a familiar keyboard and trackpad - but these are placed behind the OLED display. The user simply lifts their hands from these input devices to manipulate on-screen (or more accurately  behind -screen) objects, such as selecting a file or window. The video shows the interface in action with a series of program windows stacked behind one another, with the user selecting the desired program by hand, using the depth of the w...

Bioengineers develop smart, self-healing hydrogel

Velcro is pretty handy stuff, but imagine if there was a soft, stretchy material with the same qualities. Well, now there is. Scientists from the University of California, San Diego have created a self-healing hydrogel that binds together in seconds, essentially copying the Velcro process at a molecular level. The new material could potentially find use in medical sutures, targeted drug delivery, industrial sealants and self-healing plastics. The secret to the jello-like polymer hydrogel is its "dangling side chain" molecules, that reach out toward one another like long, spindly fingers. When developing the gel, a team led by bioengineer Shyni Varghese ran computer simulations, in order to determine the optimal length for these molecules. The resulting substance is capable of healing cuts made to itself - or of bonding with another piece of hydrogel - almost instantly. The behavior of the material can be controlled by adjusting the pH of its environment. In lab t...